Download Leaflet ( 50 Kb )
                                                                

Automatic Pump Controller is available in 4 variants

•     Time / Inflow Based   ( for pumping from Corporation Supply to Overhead Tank)
   

•     Time Switch Based   ( for pumping from a Sump to a Distributed Network )

•     Level Based                ( for pumping from a Sump / Ground Water source to Overhead Tank )
   

•     De-watering Control  ( for pumping from a Sump to ......... )
   

In 3 different models, as per the load handling capacity 

•     PC / A : Suitable for a load of 5 amp. / 1 H.P. ( 230 VAC, single phase ) as a  N / O switch ; output thru
                     a 2 way terminal block.
   
•     PC / B : Suitable for a load of 10 amp. / 1.5 H.P. ( 230 VAC, single phase ) as a  N / O switch ; output
                      thru a 2 way terminal block
   
•     PC / C : Suitable for DOL Pump Starter having momentary action push buttons,
                      DPST (N / O) for switching on & SPST (N / C) for switching off; output thru a 6
                      way terminal block

Specifications -       

 All specifications are subject to change without prior notice