Maintenance Free, Level based

Water Pump Controller

Ensures pumping of  water  by automatically switching on the pump at preset lEVEL and switching off if sump level is low ( with retry ) / overhead tank is full /
lapse of pumping duration

        FEATURES

•     Activation at preset water level

•     Water Level Indicator ( 4 stage )   

•     User friendly menu selection

•     User settable Pumping parameters i.e. Activation level, Priming, Pumping
      Duration etc.

•     Retains settings in the absence of power 

•     Protection against dry running  of pump

•     Prevents overflow from tank

•     Pumping & Tank / Process status reporting on backlit LCD + Audible signals

•     On line Sensor Check 

•     Easy installation ( doesn't require plumbing )

•     Sensors don't require any maintenance

•     Saves water & electricity

•     Suitable for Underground tank / Ground water pumps

Process of Pump Control

•     Set the activation level ( 1/4, 1/2 or 3/4)
   

•     Pump is switched on when the O/H tank level falls below the activation level
   

•     If the Sump has water
   

  •     Priming is done for 2 minutes
     

    •     If water is not available at the tank inlet, pump is switched off + audio alarm
       

    •     Else if water is available, pumping continues till any of the conditions are met

      •     Tank full or

      •     Max. pumping time of 60 min. is over or

      •     Sump goes dry
         

•     Else if Sump is dry then it shall retry @ 60 min. till the time sump has water