Maintenance Free, Real Time based

Water Pump Controller with Level Indicator

It can be programmed for use as a TIME SWITCH, to switch On & Off at preset timings,
Set the ON & OFF times ( max. 8 settings / day ), the connected Pump is switched ON & OFF
at the preset timings, shall stop Pumping in case the Water Level falls below a
preset level in the Sump or the Overhead Tank is Full, whichever occurs first.

        FEATURES

•     Real Time Based Pump Activation

•     Water Level Indicator ( 4 stage )

•     In Built Electronic Clock ( 24 Hr. format )  

•     User settable 8 Pump Time ON & OFF settings

•     User friendly menu selection

•     Programmable Pumping parameters

•     Internal Battery backup 

•     Protection against dry running  of pump / Overflow from the Overhead Tank

•     Pumping & Tank / Process status reporting on backlit LCD + Audible signals to indicate
      Sump Low

•     On line Sensor Check

•     Easy installation ( doesn't require plumbing )

•     Sensors don't require any maintenance

•     Saves water & electricity

•     Suitable for pumping water from an Underground tank to a distributed network

Process of Pump Control

Pump can be controlled thru the

 Independent ON & OFF Timings

alongwith the Level in the Sump / Overhead Tank

 The Pump Operating Logic is

Having set the Pump ON & OFF timings, the pump is switched on at preset time & continues, subject to
availability of water in the Sump or the Overhead Tank is Full, whichever occurs first.